Chopping a ‘52 chevy pickup: part 2.
Previously I showed the cuts I made chopping the top on my ‘52 chevy pickup. This pic shows the weld on the back of the cab. I cut along the seam at the bottom, since the back of the cab is nearly vertical I just cheated the corner. You can see the vertical cuts in the 1″ band under the weld. I just made the cuts with a abrasive blade on a hand grinder and bumped it in till it lined up.
I cut through the window so it would still be centered top to bottom. Next time I’ll show the doors and the new firewall.
